This page gives an overview of the planning and building requirements for building a new house or making additions to an existing house. You may require development (planning) approval, or building approval, or both. The following information will help you determine what approvals you need and how to lodge an application.
Planning approval is usually not required for a development that meets the deemed to comply provisions of the Residential Design Codes (R-Codes – Volume 1) and our Local Planning Policies, and the property is not listed on the Heritage List.
We encourage you to contact us to discuss your project with a Planning Officer (see Deemed to Comply advice section below).
You will need to apply for a building permit before starting the proposed works.
You will also need to let us know when the building work is complete by lodging a BA7 – Notice of Completion, or if the responsible person changes by lodging a BA8 – Notice of Cessation. For more information, refer to the Section 6: Notices of Completion and Cessation page on the Department of Mines, Industry Regulation and Safety website.
Deemed to comply check – Application for planning advice
Certain types of development are exempt from requiring development approval under clause 61 of the Deemed Provisions. These exemptions include the construction of a new single house, or additions and/or alterations to an existing single house that meet all of the applicable ‘deemed-to-comply’ criteria of the R-Codes – Volume 1 and any relevant local planning policy.
The Application for Advice (Deemed to Comply Check) pathway allows people who are intending to build a new single house or extend/alter an existing dwelling to have certainty regarding what approvals are required and, if any major issues are identified with the proposal this allows for an opportunity to revise your plans before lodging a formal application.
Your Deemed to Comply Check application can be submitted to the Town by emailing a completed application form (see below) and providing all other required information to email@example.com. A fee of $295 is payable at the time of lodgement.
Upon lodgement of the application, the Town will determine if all necessary information has been provided and if so the Town will contact you for payment and advise that your application has been formally accepted. The Town will provide you with the outcome of your Deemed to Comply Check within 14 days of formally accepting the application. Should the Town require additional information in order to complete a full assessment a Planning Officer will contact you.
Lodging a planning or building application for building or renovating a house
Both planning and building applications can be lodged online by emailing firstname.lastname@example.org.
The following application forms and checklists outline what to include in your application.
- Planning application forms
- Planning application checklists
- Building application forms
- Building application checklists
We aim to process and determine applications within the following timeframes:
- where we don’t need to consult with neighbours or external agencies: 60 days.
- where we need to consult with neighbours or external agencies: 90 days.
These timeframes may sometimes be extended in consultation with the applicant.
Fees and charges
Building permit applications
We process all certified applications (BA1 forms) within 10 working days, and all uncertified applications (BA2 forms) within 25 working days.
Certified Building Permit Application
You should apply for a certified application (BA1) when you have had the plans, specifications and technical documents assessed by a registered private building surveyor and have been issued a Certificate of Design Compliance (BA3).
Uncertified Building Permit Application
You should apply for an uncertified application (BA2) when your plans, specifications and technical documents have not been assessed by a private building surveyor and they will need to be assessed by our building surveyors. Regardless of the type of application, you will need an engineer to certify your plans.
If we need further information to assess your application, you will have up to 21 calendar days to provide any outstanding information. We then have the balance of the remaining 10 working days to provide a determination.
If you do not provide the outstanding information within the 21 days, we may refuse your application.
Fees and charges
The building permit fees for a residential dwelling with a contract value greater than $20,000 is calculated at the following percentages of the total contract price:
- application Fee: 0.19%
- building Service Levy: 0.137%
You may also need to pay a verge bond fee and the CTF Levy. Use our online fee calculator to estimate your building fees.
Infrastructure protection bond
For building projects over $20,000, you will also need to pay an Infrastructure Protection Bond. An Infrastructure Protection Bond is held by us to ensure that any damage caused to the Town’s verge infrastructure during construction works is rectified to pre-works condition.
To find out more and apply, visit our infrastructure protection bond page.
If your project has a construction value of more than $20,000, you will need to pay the Construction Training Fund (CTF) Levy. The rate of the levy is 0.2% of the total value of construction (inclusive of GST).
Permit for activity on thoroughfare (PAT)
If you need to use the Town’s verges or reserves for construction related activities (e.g. storage of building materials, skip bin, deliveries, cranes, etc.) you will need to apply for a Permit for Activity on Thoroughfare.
Construction management plan (CMP)
A CMP is required where a condition of planning approval requires one. This is dependent on the scope of works proposed and the location of your property. Where a CMP is required, it must be submitted to, and approved by, the Town prior to submitting your building permit application. If the CMP is not approved prior to submitting your building permit application, your building permit application will be ‘deemed not yet received’ until the condition of planning approval is cleared (i.e. the CMP is approved).
For more information, fees, application form and checklist please visit our construction management plan page
Other agencies to consult
It is important to check with our Technical Services team and other service providers (e.g. Water Corp and Western Power) to ensure your proposed development does not affect any existing assets (e.g. drainage infrastructure, sewer easements, power poles).
Noisy construction work
If you plan on doing noisy work outside the hours of 7.00am to 7.00pm Monday to Saturday, except for Sundays and public holidays when no noisy work can occur, you must get approval from our Environmental Health Services team by submitting a Noise Management Plan
Building or renovating as an owner-builder
An owner-builder is someone who has the skill or capacity to build or alter their own house or small commercial building or supervise construction work.
If the construction value of the work is over $20,000, you will need to apply to the Department of Mines, Industry Regulation and Safety (DMIRS) for an Owner-Builder Certificate. You must have an owner-builder certificate before we will grant you a building permit.
If your building project involves demolition, you will need to obtain a demolition permit. For more information, see our demolitions page.
Works affecting other land
You must get consent from the owner/s of adjoining land prior to work starting, if any of your works may be reasonably likely to affect their land. For more information, including links to the consent forms, visit the Section 11: Works Affecting Other Land Page on the Department of Mines, Industry Regulation and Safety website.
Safe asbestos removal
If you are altering part of your house that contains asbestos, or you think may contain asbestos, it’s important you follow appropriate safety precautions. Visit our asbestos page for more information.